document number: 93535 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 14-may-08 1 standard recovery diodes (hockey puk version), 1400 a sd1100c..c series vishay high power products features ? wide current range ? high voltage ratings up to 3200 v ? high surge current capabilities ? diffused junction ? hockey puk version ? case style b-43 ? lead (pb)-free typical applications ? converters ? power supplies ? machine tool controls ? high power drives ? medium traction applications electrical specifications product summary i f(av) 1400 a b-43 rohs compliant major ratings and characteristics parameter test conditions sd1100c..c units 04 to 20 25 to 32 i f(av) 1400 1100 a t hs 55 55 c i f(rms) 2500 2000 a t hs 25 25 c i fsm 50 hz 13 000 10 500 a 60 hz 13 600 11 000 i 2 t 50 hz 846 551 ka 2 s 60 hz 772 503 v rrm range 400 to 2000 2500 to 3200 v t j - 40 to 180 - 40 to 150 c voltage ratings type number voltage code v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm maximum at t j = t j maximum ma sd1100c..c 04 400 500 35 08 800 900 12 1200 1300 16 1600 1700 20 2000 2100 25 2500 2600 30 3000 3100 32 3200 3300
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93535 2 revision: 14-may-08 sd1100c..c series vishay high power products standard recovery diodes (hockey puk version), 1400 a note ? the table above shows the increment of thermal resistance r thj-hs when devices operate at diffe rent conduction angles than dc forward conduction parameter symbol test conditions sd1100c..c units 04 to 20 25 to 32 maximum average forward current at heatsink temperature i f(av) 180 conduction, half sine wave double side (single side) cooled 1400 (795) 1100 (550) a 55 (85) 55 (85) c maximum rms forward current i f(rms) 25 c heatsink temperature double side cooled 2500 2000 a maximum peak, one-cycle forward, non-repetitive current i fsm t = 10 ms no voltage reapplied sinusoidal half wave, initial t j = t j maximum 13 000 10 500 t = 8.3 ms 13 600 11 000 t = 10 ms 100 % v rrm reapplied 10 930 8830 t = 8.3 ms 11 450 9250 maximum i 2 t for fusing i 2 t t = 10 ms no voltage reapplied 846 551 ka 2 s t = 8.3 ms 772 503 t = 10 ms 100 % v rrm reapplied 598 390 t = 8.3 ms 546 356 maximum i 2 t for fusing i 2 t t = 0.1 to 10 ms, no voltage reapplied 8460 5510 ka 2 s low level value of threshold voltage v f(to)1 (16.7 % x x i f(av) < i < x i f(av) ), t j = t j maximum 0.78 0.84 v high level value of threshold voltage v f(to)2 (i > x i f(av) ), t j = t j maximum 0.94 0.88 low level value of forward slope resistance r f1 (16.7 % x x i f(av) < i < x i f(av) ), t j = t j maximum 0.35 0.40 m high level value of forward slope resistance r f2 (i > x i f(av) ), t j = t j maximum 0.26 0.38 maximum forward voltage drop v fm i pk = 1500 a, t j = t j maximum t p = 10 ms sinusoidal wave 1.31 1.44 v thermal and mechanical specifications parameter symbol test conditions sd1100c..c units 04 to 20 25 to 32 maximum junction operating temperature range t j - 40 to 180 - 40 to 150 c maximum storage temperature range t stg - 55 to 200 maximum thermal resistance, junction to heatsink r thj-hs dc operation single side cooled 0.076 k/w dc operation double side cooled 0.038 mounting force, 10 % 9800 (1000) n (kg) approximate weight 83 g case style see dimensions - li nk at the end of datasheet b-43 r thj-hs conduction conduction angle sinusoidal conduction rectangular conduction test conditions units single side double side single side double side 180 0.007 0.007 0.005 0.005 t j = t j maximum k/w 120 0.008 0.008 0.008 0.008 90 0.010 0.010 0.011 0.011 60 0.015 0.015 0.016 0.016 30 0.026 0.026 0.026 0.026
document number: 93535 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 14-may-08 3 sd1100c..c series standard recovery diodes (hockey puk version), 1400 a vishay high power products fig. 1 - current ratings characteristics fig. 2 - current ratings characteristics fig. 3 - current ratings characteristics fig. 4 - current ratings characteristics fig. 5 - current ratings characteristics fig. 6 - current ratings characteristics 40 60 80 100 120 140 160 180 0 200 400 600 800 1000 30 60 90 120 180 average forward current (a) maximum allowable heatsink temperature (c) conduction angle (single side cooled) r (d c ) = 0.0 76 k /w th j- hs sd 1100c..c series (400v to 2000v) 20 40 60 80 100 120 140 160 180 040080012001600 30 60 90 180 dc 120 cond uction period ( s in g l e s id e c o o le d ) r ( d c ) = 0 .0 7 6 k /w thj-hs maxim um allowable heatsink tem perature (c) average forward current (a) sd 1100c..c series (400 v to 2000 v) 20 40 60 80 100 120 140 160 180 0400800120016002000 30 60 90 120 180 average forward current (a) maximum allowable heatsink tem perature (c) cond uction angle (d ouble side c ooled) r (d c ) = 0.038 k/w th j-hs sd 110 0c ..c se rie s (400v to 2000v ) 0 20 40 60 80 100 120 140 160 180 0 500 1000 1500 2000 2500 3000 30 60 90 180 dc 120 average forward current (a) maxim um allowable heatsink tem perature (c) cond uction period (double side cooled) r (d c ) = 0 .03 8 k/w th j- hs sd 1 100c ..c series (400v to 2000v ) 40 50 60 70 80 90 100 110 120 130 140 150 0 200 400 600 800 30 60 90 120 180 average forward current (a) maximum allowable heatsink temperature (c) conduction angle sd 1100c..c series (2500v to 3200v ) (single side cooled) r (dc) = 0.076 k/w thj- hs 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 200 400 600 800 1000 1200 1400 30 60 90 180 dc 120 average forward current (a) maximum allowable heatsink temperature ( c) conduction period sd1100c..c series (2500v to 3200v) (single side cooled) r (dc) = 0.076 k/w th j-hs
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93535 4 revision: 14-may-08 sd1100c..c series vishay high power products standard recovery diodes (hockey puk version), 1400 a fig. 7 - current ratings characteristics fig. 8 - current ratings characteristics fig. 9 - forward power loss characteristics fig. 10 - forward power loss characteristics fig. 11 - forward power loss characteristics fig. 12 - forward power loss characteristics 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 200 400 600 800 1000 1200 1400 30 60 90 120 180 average forward current (a) maximum allowable heatsink temperature (c) conduction angle sd 1100c..c series (2500v to 3200v) (double side cooled ) r (d c) = 0.038 k/w thj-h s 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 400 800 1200 1600 2000 2400 30 60 90 180 dc 120 avera ge forward curren t (a) maximum allowable heatsink temperature (c) conduction period sd1100c..c series (2500v to 3200v) (double side cooled) r (d c) = 0.038 k/w thj-h s 0 500 1000 1500 2000 2500 3000 3500 040080012001600 180 120 90 60 30 rms limit maximum average forward power loss (w) average forward current (a) conduction angle sd 1100c..c series (400v to 2000v) t = 180c j 0 500 1000 1500 2000 2500 3000 3500 4000 4500 0 500 1000 1500 2000 2500 3000 dc 180 120 90 60 30 rm s limit conduction period maximum average forward power loss (w ) average forward current (a) sd1100c..c series (400v to 2000v) t = 180c j 0 500 1000 1500 2000 2500 3000 0 200 400 600 800 1000 1200 1400 180 120 90 60 30 rm s limit conduction angle maximum a verage forward power loss (w) average forw ard current (a) sd1100c..c series (2500v to 3200v) t = 150c j 0 500 1000 1500 2000 2500 3000 3500 0 400 800 1200160020002400 dc 180 120 90 60 30 rms limit conduction period maximum average forward power loss (w) average forward current (a) sd1100c..c series (2500v to 3200v ) t = 150c j
document number: 93535 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 14-may-08 5 sd1100c..c series standard recovery diodes (hockey puk version), 1400 a vishay high power products fig. 13 - maximum non-repetitive surge current single and double side cooled fig. 14 - maximum non-repetitive surge current single and double side cooled fig. 15 - maximum non-repetitive surge current single and double side cooled fig. 16 - maximum non-repetitive surge current single and double side cooled fig. 17 - forward voltage drop characteristics fig. 18 - forward voltage drop characteristics 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 0 0 1 0 1 1 n um b er o f e q ua l a m p l itud e h a l f c y cl e cu rre nt p ul se s (n ) peak half sine wave forward current (a) in it ia l t = 1 8 0 c @ 60 hz 0.008 3 s @ 50 hz 0.010 0 s j at any rated load condition and with ra ted v a p p lied fo llow in g s urg e . rrm sd 1 100c ..c serie s (400v to 200 0v ) 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000 0.01 0.1 1 pulse train duration (s) peak half sine wave forward current (a) versus pulse train duration. in it ia l t = 1 80 c no voltage reapplied rated v reapplied rrm j maximum non repetitive surge current sd1100c..c series (400v to 2000v ) 3000 4000 5000 6000 7000 8000 9000 10000 0 0 1 0 1 1 number of equal amplitude half cycle current pulses (n) peak half sine wave forward current (a) initial t = 150c @ 60 hz 0.0083 s @ 50 hz 0.0100 s j sd 1100 c..c ser ies (2500v to 3200v) at any rated load condition and with rated v applied following surge. rr m 3000 4000 5000 6000 7000 8000 9000 10000 11000 0.01 0.1 1 pulse train duration (s) peak half sine wave forward current (a) initial t = 150 c no voltage reapplied rated v reapplied j rrm versus pulse train duration. sd 1100c..c series (2500v to 3200v) m aximum non repet itive surge curren t 100 1000 10000 0.5 1 1.5 2 2.5 3 3.5 4 t = 25c j instan ta neous forward v oltage (v) instantaneous forw ard current (a) t = 180c j sd1100c..c series (400v to 2000v ) 100 1000 10000 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 t = 25c j in stantan eous forward voltage (v) in stantaneous forw ard current (a) t = 150c j sd 1100 c..c series (2500v to 3200v )
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 93535 6 revision: 14-may-08 sd1100c..c series vishay high power products standard recovery diodes (hockey puk version), 1400 a fig. 19 - thermal impedance z thj-hs characteristics ordering information table 0.001 0.01 0.1 0 1 1 1 . 0 1 0 . 0 1 0 0 . 0 sq ua re w a ve pulse d uration (s) th j - h s t ra n sie n t t h e rm a l im p e d a n c e z ( k /w ) stea d y state va lue r = 0 .076 k/w (single side c ooled) r = 0 .038 k/w (d ouble side c ooled) (d c o peration) thj-hs thj-hs sd 1 100c..c series 1 - diode 2 - essential part number 3 - 0 = standard recovery 4 - c = ceramic puk 5 - voltage code x 100 = v rrm (see voltage ratings table) 6 - c = puk case b-43 device code 5 13 24 6 sd 110 0 c 32 c links to related documents dimensions http://www.vishay.com/doc?95249
document number: 95249 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 26-nov-07 1 b-43 outline dimensions vishay semiconductors dimensions in millimeters (inches) 42 (1.65) dia. max. 40.5 (1.59) dia. max. quote between upper and lower pole pieces has to be considered after application of mounting force (see thermal and mechanical specifications) 3.5 (0.14) dia. nom. x 1.8 (0.07) deep min. both ends 0.8 (0.03) min. both ends 25.3 (1) dia. max. 2 places 14.4 (0.57) 15.4 (0.61)
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
